Repair - TM-5-4930-233-140116

TM 5-4930-233-14

TM 4930-14/1

REEL CABINET ASSEMBLY

4-18. BATTERY BOX ASSEMBLY - SERVICE/REPLACE/REPAIR - (Cont.)

Repair

CAUTION

Do not allow baking soda solution to enter batteries. Failure to do so could damage equipment.

(1)

Flush metallic parts and battery cable ends with a solution of baking soda and water, to neutralize any acid

on these parts.

(2)

Clean battery tops with a baking soda and water solution. Do not allow mixture to enter batteries.

WARNING

Clean all parts in a well ventilated area. Avoid inhalation of solvent fumes and

prolonged exposure of the skin to the cleaning solvent. Failure to do so can

cause severe injury or death. Do not use near flame or excessive heat. Flash

point of solvent is 100 to 138 (38 to 59 ).

(3)

Remove any grease or gummy deposits with dry cleaning solvent.

(4)

Inspect batteries for cracks, loose posts or other damage. Replace if needed.

(5)

Inspect battery cables for corrosion, breaks or deteriorated insulation. Replace if damaged.

(6)

Inspect all sheet metal parts for cracked or broken weldments, dents or distortion. Re-weld and straighten

parts as necessary.

(7)

Inspect all parts for obvious wear or damage. Replace as required.

4-43