Figure 155

Figure 157

Figure 155

Install new "0" ring in filter adopter housing. Install

Position new gasket and "O" rings on pressure

filter element and housing. Tighten filter housing 20 to

regulator valve. Install valve on studs.

25 ft. lbs. torque [2, 8-3, 4 m.kg].

Figure 156

With new valve body to pump gasket in position

insert pump drive shaft through valve body. Use caution

as not to damage valve body oil seal. It may be

necessary to turn impeller one way or the other to align

pump shaft with drive sleeves.