Figure 149

Figure 149

Figure 152

Install turbine to turbine shaft retainer ring.

Align holes in impeller cover with holes in impeller.

Install bolts and washers and tighten to specified torque.

Figure 110

Figure 153

If Impeller cover bearing was removed, press

Locate detent balls and springs In control valve. Position

bearing In position and secure with retainer ring.

new gasket. Secure valve with bolts and washers.

Tighten to specified torque.

Figure 154

Figure 151

Install pump drive sleeves.

Install a new Impeller cover "0" ring and grease

lightly to facilitate reassembly.