REMOVAL OF COVER

FUEL SYSTEM

TESTING AND ADJUSTMENT

INSTALLATION OF CLAMP

REMOVAL OF COVER

3. Cover. 7. 3P1565 Collect Clamp.

1. Shut-off solenoid. 2. Cover.

7. Move the governor control lever to FULL LOAD

position.

8. Put magnetic point (9) on dial indicator (8).

Put the

indicator assembly in clamp (7).

INSTALLATION OF COVER

3. 2P8331 Cover. 4. 3J6956 Spring. 5. 5P298

Zero Set Pin, with 17.8507 on it.

INSTALLATION OF DIAL INDICATOR

7. 3P1565 Collect Clamp. 8. 3P1567 Dial

Indicator. 9. 3P1569 Magnetic Point.

4. Put screw (6) in the hole over pin (5) and spring (4).

INSTALLATION OF SCREW

6. 8S7271 Screw.

5. Turn screw (6) clockwise until pin (5) is held against the

housing for the fuel injection pumps. Do not tighten

screw (6) too tight.

INDICATOR SET ON ZERO

6. Put clamp (7) in cover (3).

8. 3P1567 Dial Indictor. 10. Pointers.