Maintenance Code - TM-5-3740-214-24P0006

TM 5-3740-214-24P

Code

Definition

Item to be manufactured or fabricated at the organizational level.

Item to be manufactured or fabricated at the direct support maintenance level.

Item to be manufactured or fabricated at the general support maintenance level.

Item to be manufactured or fabricated at the depot maintenance level.

Item to be assembled at organizational level.

Item to be assembled at the direct support maintenance level.

Item to be assembled at general support maintenance level.

Item to be assembled at depot maintenance level.

Item is not procured or stocked because the requirements for the item will result in the replacement of the next

higher assembly.

XB Item is not procured or stocked. If not available through salvage, requisition.

XC Installation drawing, diagram, instruction sheet, field service drawing, that is identified by manufacturer's part

number.

XD A support item that is not stocked. When required, item will be procured through normal supply channels.

NOTE

Cannibalization or salvage may be used as a source of supply for any items source coded above

except those coded XA or AD

(2) Maintenance Code. Maintenance codes are assigned to indicate the levels of maintenance authorized to USE

and REPAIR support items. The maintenance codes are entered in the third and fourth positions of the Uniform SMR

Code format as follows:

(a) The maintenance code entered in the third position will indicate the lowest maintenance level authorized to

remove, replace and use the support item. The maintenance code entered in the third position will indicate one of the

following levels of maintenance:

Code

Application/Explanation

Crew or operator maintenance performed within organizational maintenance.

Support item is removed, replaced, used at the organizational level.

Support item is removed, replaced, used at the direct support level.

Support item is removed, replaced, used at the general support level.

Support items that are removed, replaced, used at depot, mobile depot, or specialized repair activity only.

(b) The maintenance code entered in the fourth position indicates whether the item is to be repaired and identifies

the lowest maintenance level with the capability to perform complete repair, yet does not preclude some degree of repair

which may be accomplished at a lower category of maintenance.

Code

Application/Explanation

The lowest maintenance level capable of complete repair of the support item is the organizational level.

The lowest maintenance level capable of complete repair of the support item is the direct support level.

The lowest maintenance level capable of complete repair of the support item is the general support level.

The lowest maintenance level capable of complete repair of the support item is the depot level.

Repair restricted to designated Specialized Repair Activity.

Nonreparable. No repair is authorized.

No repair is authorized. The item may be reconditioned by adjusting, lubricating, etc., at the user level. No

parts or special tools are procured for the maintenance of this item.

(3) Recoverability Code. Recoverability codes are assigned to support items to indicate the disposition action on

unserviceable items. The recoverability code is entered in the fifth position of the Uniform SMR Code format as follows: