 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-3655-214-13&P
5-2. MOTOR ELECTRIC - Continued
LOCATION/ITEM
ACTION
REMARKS
c.
Inspect end bells (5, 6), for cracks or
other defects.
d. Inspect bearings (9), for looseness, flat
edges or other defects.
e. Inspect electrical parts for evidence of
overheating, arcing or insulation
breakdown.
REPAIR REPLACEMENT
4.
a. Replace all defective parts.
REASSEMBLY
5.
a. Solder capacitor leads (14) and install
cover (13) and two screws (12).
b. Install rotor (11) in stator and housing
(15).
c.
Place rotating switch (10) on rotor (11).
d. Press one bearing (9) in end bell (5) and
end bell (6).
e. Install thermoguard (8) and switch and
terminal board (7).
f.
Position end bell (5) and (6) on frame
(15) and install four screws (4) and four
nuts (3).
g
Install terminal cover (2) with two
screws (1).
INSTALLATION
6
a. Refer to Chapter 4 and install motor.
5-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals