|
|
TM 5-3655-214-13&P
4-15. PUMP - Continued
REMOVAL
c.
Disconnect line fittings (2) from pump
elbow fitting.
d. Remove two capscrews (3) and two
lockwashers (4).
e. Remove pump (5).
CLEANING AND INSPECTION
2.
WARNING
Dry cleaning solvent, P-D-680 or P-S-661, used to clean parts is potentially dangerous
to personnel and property. Use in a well-ventilated area as the fumes are dangerous if
inhaled. Avoid repeated and prolonged skin con- tact. Do not use near open flame or
excessive heat. Flash point of solvent is 100F. - 138F. (38C. - 59C.)
3.
a. Inspect pump drive, tube, fittings and by-pass valve for cracks or other
defects. In the event any of these parts
are defective, replace them as ap-
plicable in the following paragraphs.
4-27
4-27
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |