|
|
TM 5-3610-254-14
Table 3-1. OPERATOR TROUBLESHOOTING (cont)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
5.
NO WATER FROM FAUCET
Step 1. Check to see if there is water in tank.
Fill tank.
Step 2. Check to see if the proper circuit breaker in main panel for
the water pump is in the ON position.
Position applicable circuit breaker to ON.
6.
TEMPERATURE IN SHELTER TOO HOT OR TOO COLD
Check thermostat for proper setting.
Set thermostat to proper temperature.
7.
PMT PROCESSOR FILM OR PAPER FAILS TO TRANSPORT
Film or paper pileup or jamming.,
Clear processor of remaining material and refer to manufac-
turer's manual for further instructions.
8.
PIN-POINT LIGHT SOURCE WON'T WORK
Step 1. Light source not plugged in.
Plug light source in.
Step 2. Timer not set.
Set timer.
Step 3. Lamp burned out.
Replace lamp.
3-4
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |