|
|
TM 5-3610-254-14
NOTE
Within designated interval, these checks are to be
performed in the order listed
B - Before Operation
D - During Operation
Item
Interval
Item to be Inspected
Equipment Is Not
No.
B
D
Procedure
Ready/Available If:
1
Light table, tilt top
Check that both fluorescent
tubes are illuminated.
If
necessary, refer to Organi-
zational Maintenance for
service/repair.
2
PMT Processor
Be sure that there are
proper levels of chemicals.
Check for correct and smooth
operation. If necessary,
service unit in accordance
with commercial manual
instructions.,
3
Camera, vertical
Leaks in vacuum
Check for correct lens cali-
system.
bration. Check for correct
operation of vacuum pumps and
smooth operation of lens and
copyboard system. Check for
leaks in vacuum system. If
necessary, service unit in
accordance with commercial
manual instructions.
4
Film dryer
Unit does not
Check correct and smooth
operate.
operation of the unit and
cleanliness of filter intake
pads and drive and air mech-
anism. If necessary, serv-
ice unit in accordance with
commercial manual instruc-
tions.
2-18
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |