MECHANICAL

TM 32-5410-215-14&P

Table 5-2. Organizational Maintenance Troubleshooting - Continued

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

MECHANICAL - continued

Step 2. Check floor tiedown socket for accumulated dirt.

Clean socket if dirty.

Step 3. Inspect tiedown assembly for damage.

If damaged, repair or replace as necessary.

6. DRAWER FAILS TO OPEN OR CLOSE PROPERLY.

Step 1. Check for items in drawer blocking drawer movement.

Remove items if blocking drawer movement.

Step 2. Check for drawer slide lubrication.

Lubricate drawer slides if required.

Step 3. Check for damaged parts.

Repair or replace as necessary.

7. SHELF PLUNGER ASSEMBLY FAILS TO OPERATE PROPERLY.

Step 1. Check for binding due to misalignment.

Realign as necessary.

Step 2. Check for plunger assembly lubrication.

Lubricate plunger assembly as required.

Step 3. Check for damaged parts.

Repair or replace as necessary.

Section VI. MAINTENANCE OF REPAIR PARTS STOWAGE FACILITIES

AN/ USM-378 AN/USM..379 AND AN/USM-380 (RPSF)

disassembly, assembly, and installation of equipment

5-8 GENERAL. This section contains organizational

within the shelter.

maintenance instructions as allocated by the MAC.

Instructions are for equipment cleaning, removal,

5-9