 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 3-4240-302-30&P-1
LOCATION
ITEM
ACTION
REMOVAL
Female hose adapter
1. Secure female hose adapter (3) with wrench
and use second wrench to loosen male hose
adapter (2) from female hose adapter (3).
2. Unscrew male hose adapter (2). Retain for
further use.
3. Disassemble compartment control module
4. Remove tubing (1) from female hose adapter (3).
5. Secure nut (5) with wrench and use second
wrench to loosen female hose adapter (3).
6. Unscrew female hose adapter (3) from nut (5)
and discard female hose adapter (3) and
packing (4).
INSTALLATION
Female hose adapter
1. Place replacement packing (4) over barbed end
of replacement female hose adapter (3).
2. Insert female hose adapter (3) through hole in
compartment control module housing (6).
3. Secure nut (5) to female hose adapter (3) by
hand. Tighten finger tight.
4. Secure nut (5) with wrench and use second
wrench to tighten female hose adapter (3) to
nut (5). Take care not to over tighten.
5. Connect tubing (1) to female hose adapter (3).
6. Reinstall compartment control module panel
7. Insert previously removed male hose adapter
(2) into female hose adapter (3). Hand tighten.
8. Secure female hose adapter (3) with wrench
and use second wrench on male hose adapter
(2). Tighten, taking care not to over tighten.
2-97
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals