|
|
TM 3-4240-284-30&P
2-15. COMPARTMENT CONTROL MODULE - MAINTENANCE INSTRUCTIONS (Cont).
ACTION
ITEM
LOCATION
REMOVAL/INSTALLATION
REMOVAL
1. Disassemble CCM (p 2-171).
Housing
Power card
2. Remove screws(1) and washer (2).
3. Pull power card (3) from its socket.
INSTALLATION
1. Insert power card (3) into connector.
2. Secure power card (3) with screw (1) and
washer (2).
3. Reassemble CCM (p 2-171).
REMOVAL/JINSTALLATION
REMOVAL
1. Disassemble CCM (p 2-171).
Batteries (warning system)
Housing
2. Remove four nuts (1) and screws (2).
3. Remove two battery retainers (3).
4. Unsolder and remove four batteries (4).
INSTALLATION
1. Solder connections on four warning system bat-
teries (4). Refer to page 2-184.
2. Install and Secure the four batteries (4) using two
retainers (3), four screws (2), and four nuts (1).
3. Reassemble CCM (p 2-171).
2-174
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |