DISASSEMBLY - TM-3-4240-284-20-P0089

TM 3-4240-284-20&P

ACTION

ITEM

LOCATION

DISASSEMBLY

Protective Entrance Con-

Remove screws (1), retainer (2), light lens (3), and dome

Dome light

light gasket (4).

trol Module

Remove red lamp (5) by pressing in on the bulb and

rotating it counterclockwise. Pull red lamp from

socket (6).

Remove clear lamp (7) by pressing in on the bulb and

rotating it counterclockwise. Pull clear lamp from

socket (8).

REPAIR

Replace if unserviceable.

Lamps, screws, lens, and

dome light gasket

REASSEMBLY

Dome Iight

Insert red lamp (5) in socket(6). Aline studs in lamp base

Protective Entrance Con-

trol Module

with slot in socket. Press in and turn red Iamp clockwise

until it locks in place.

Insert clear lamp (7) in socket (8). Aline studs in lamp

base with slot in Socket. Press in and turn clear lamp

clockwise until it locks in place.

Place gasket (4) on dome light lens (3).

Place retainer (2) on gasket and aline screw hales.

Position assembly in place and install screws (1).

Tighten securely.

2-67