|
|
TM 3-4240-284-20&P
LOCATION
ITEM
ACTION
REMOVAL
Thoroughly dean mounting surface with dry-cleaning
solvent (item 4, app D). Surface must be free of all
contamination such as oil, grease, dirt, or any foreign
matter.
INSTALLATION
NOTE
Identification and instndon plates are
made of aluminum foil with a solvent-
activated backing.
Activate the back of the plate with dry-cleaning solvent
(item 4, app D).
Mount the plate and apply pressure to the plate surface.
Spray or- brush plate with aliphatic polyurethane coating
(item 2, app D).
2-57
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |