Section VI. MAINTENANCE PROCEDURES FOR M10 PROTECTIVE ENTRANCE

TM 3-4240-284-20&P

Section VI. MAINTENANCE PROCEDURES FOR M10 PROTECTIVE ENTRANCE

2-10. GENERAL. These instructions are for use by

organizational maintenance personnel. They

apply to:

M10 Protective entrance

Protective entrance control module

2-11. M10 PROTECTIVE ENTRANCE - MAINTENANCE INSTRUCTIONS.

This task covers:

c. Removal

a. Replacement

g. Painting

e. Disassembly

h. Inspection/Repair

f. Reassembly

b. Repair

d. Installation

INITIAL SETUP

References

Tools

General Mechanics Tool Kit

TM 11-7440-294-14 (to be published)

SC 5180-90-CL-N26

Personnel Required: 2

Portable electric drill NSN 5130-00-889-8994

ACTION

ITEM

LOCATION

REPLACEMENT

Refer to TM 11-7440-294-14 for protective entrance

Ml O Protective entrance

TACFIRE

replacement instructions.

REPAIR

Repair tears or slits:

M10 Protective Entrance

Impermeable wall fabric

Clean damaged area using rags (Item 6, app D) and

(PE)

dry-cleaning solvent (item 4, app D).

Cut a piece of tape (item 7, app D) about four inches

longer than the tear or slit. position tape over the tear

or slit and press firmly in place.

Apply tape to the inside of the protective entrant"

impermeable fabric wall. If necessary for added

strength, crossed strips of tape may be used

2-56 Change 1