ELECTRICAL WIRING.

TM 3-4230-209-30&P

2-188

2-43. ELECTRICAL WIRING.

This task covers:

c. Reassembly

a. Disassembly

b. Repair

INITIAL SETUP

Equipment Condition

Tools and Special Tools

Wiring is removed from the water heater.

Automotive Maintenance and Repair Field Maintenance

Shop Equipment, Basic, Less Power (SC 4910-95-CL-A31 )

Materials/Parts

Electrical leads (fig D-36 thru D-55)

REMARKS

ACTION

LOCATION/lTEM

Electrical Wiring/

Disassemble electrical leads (1 thru 20) listed in table on page 2-155 by

Electrical leads (1 thru 20)

cutting off any unserviceable lug terminals (21 ) except for electrical

Lug terminals (21)

lead (18) which has an electrical plug connector.

Disassemble electrical lead (18) using the following steps:

Screws (22)

Strap (23)

Step 1. Unscrew and remove two screws (22) and a strap (23) located on

Electrical connector

electrical connector cable clamp (24).

cable clamp (24)

Step 2. Unscrew and slide electrical connector cable clamp (24) and

Electrical conduit

adapter (25)

electrical conduit adapter (25) back on electrical wire (26).

Step 3. Unsolder electrical wire (26) from electrical plug connector (27)

Electrical wire (26)

Electrical plug

contact pin.

Step 4. If required, slide electrical conduit adapter (25) and electrical

connector (27)

connector cable clamp (24) off electrical wire (26).

Step 5. Cut off lug terminal (21) on the other end only if it is damaged.