POWER CABLE ASSEMBLY.

2-184

TM 3-4230-209-30&P

2-42. POWER CABLE ASSEMBLY.

This task covers:

a. Disassembly

c. Reassembly

b. Repair

INITIAL SETUP

Tools and Special Tools

Equipment Condition

Power cable is removed from the water heater.

Automotive Maintenance and Repair Field Maintenance

Shop Equipment, Basic, Less Power (SC 4910-95-CL-A31)

Materials/Parts

Silicone compound (item 33, app C)

Power cable (fig D-34)

ACTION

REMARKS

LOCATION/lTEM

Power Cable Assembly/

Unscrew and remove the two screws (1) and strap (2) located on the back

Screw (1)

of electrical cable clamp (3). Unscrew electrical cable clamp (3) and slide it

Strap (2)

Electrical cable clamp (3)

back on power cable (4).

Power cable (4)

Screws (5)

Unscrew and remove the two screws (5) in electrical plug connector (6).

Separate, the two halves.

Electrical plug connector (6)

Using proper tools, cut and scrape off the silicone compound encasing

the wires. Unsolder the wires and remove power cable (4).

Cut two lug terminals (7) off the other end of power cable (4).

Lug terminals (7)