|
|
2-25.20 HP GASOLINE ENGINE ASSEMBLY.
This task covers:
c. Repair
a. Disassembly
d. Reassembly
b. Replacement
INITIAL SETUP
Equipment Condition
Tools and Special Tools
Gasoline engine is removed from skid base subassembly. See
Automotive Maintenance and Repair Field Maintenance
Shop Equipment, Basic, Less Power (SC 4910-95-CL-A31)
References
TM 5-2805-259-14
REMARKS
ACTION
LOCATION/lTEM
The governor on the gasoline engine is adjusted and
See TM 5-2805-259-14.
Gasoline Engine/
set to 3,708 rpm in accordance with instructions in the
gasoline engine manual TM 5-2805-259-14. How-
ever, when the gasoline engine is used in the pump
unit assembly, the governor must be adjusted and set
to 3,850 rpm. The procedure for performing the
See skid base subassembly (para 2-20).
Gasoline Engine/
adjustment is described in TM 5-2805-259-14, except
that the setting of 3,850 rpm is to be used. The
tachometer on the control panel assembly is to be
used to verify that the required revolutions are
obtained. A handheld centrifugal tachometer may be
See TM 5-2805-259-14.
Gasoline Engine/
used to confirm the accuracy of the governor adjust-
ment.
Gasoline Engine/
See TM 5-2805-259-14.
2-119
TM 3-4230-209-30&P
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |