SKID BASE SUBASSEMBLY. - TM-3-4230-209-30-P0082

TM 3-4230-209-30&P

2-66

2-20. SKID BASE SUBASSEMBLY.

This task covers:

c. Reassembly

a. Disassembly

b. Repair

INITIAL SETUP

Equipment Condition

Tools and Special Tools

Unit maintenance authorized components are removed in

Automotive Maintenance and Repair Field Maintenance

TM 3-4230-209-20&P and are not covered in this manual.

Shop Equipment, Basic, Less Power (SC 4910-95-CL-A31)

Special Safety Instructions

Materials/Parts

Antiseizing tape (item 38, app D)

Sealing compound (item 32, app D)

WARNING

Wooden blocks

Unless the skid base subassembly is securely blocked, never reach under

it while it is raised off the floor. Failure to comply may result in a crushed

References

arm.

TM 9-237

TM 43-0139

TM 5-2805-259 series

REMARKS

ACTION

LOCATION/lTEM

Skid Base Subassembly/

Remove hexagon head cap screw (1), internal tooth lock washer (2), and

Hexagon head cap

bracket (3) from alternator generator (4). Remove nut (5), washer (6), and

screw (1)

Internal tooth lock

disconnect ground lead (7). Replace nut (5) and washer (6). Remove

nut (8), washer (9) and groove pulley (10). Remove two hexagon plain

washer (2)

nuts (11), internal tooth lock washers (12), hexagon head cap

Bracket (3)

screws (13), and internal troth lock washers (14). Remove alternator

generator (4).

Nut (5)

Washer (6)

Ground lead (7)

Nut (8)