REASSEMBLY (CONT) - TM-3-4230-209-30-P0081

Install two channel clamping nuts (4) into each of the vertical frame mem-

Channel clamping nuts (4)

hers of the center frame support (5), only if removed. Position the two

Center frame support (5)

attach brackets (6) on vertical frame member. Aline holes to mate with

Attach brackets (6)

channel clamping nuts (4). Secure with four hexagon head cap screws (7).

Hexagon head cap

screws (7)

Pawl fastener (8)

Position pawl fastener (8) onto inside surface of tool box lid (9). Attach

knob (10) onto pawl fastener (8) and aline mounting holes. Insert two

Tool box lid (9)

machine screws (11) through tool box lid (9) and pawl fastener (8) and

Knob (10)

Machine screws (11)

secure with two hexagon self-locking nuts (12).

Hexagon self-locking

nuts (12)

Position pump frame support ( 13) between

Pump frame support (13)

the end of unit and aline holes. Secure with

Hexagon head cap

screws (14), flat washers (15), and hexagon

screws (14)

Flat washers (15)

Hexagon self-locking

nuts (16)

TM 3-4230-209-30&P

2-65