REASSEMBLY (CONT) - TM-3-4230-209-30-P0113

Using antiseizing tape or sealing compound, wrap or coat the external

Diaphragm valve (19)

threads of pipe bushing (20), two pipe elbows (21), pipe nipple (22), and

Pipe bushing (20)

two metallic pipes (23).

Pipe elbow (21 )

Pipe nipple (22)

Screw diaphragm valve (19), pipe bushing (20), and one pipe elbow (21)

Metallic pipe (23)

together. Tighten diaphragm valve (19) until the handle is horizontal and is

pointing in the same direction as the other two handles.

While holding diaphragm valve (19), tighten pipe bushing (20) and pipe

elbow (21). Position pipe elbow (21) so it is horizontal and pointing away

from the handles. Screw the second pipe elbow (21) into the first pipe

elbow (21).

Screw pipe nipple (22) into the second pipe elbow (21). Tighten pipe

nipple (22) until it is directly behind and in line with the front piping. Screw

two metallic pipes (23) in the upright pipe and tighten. Once all parts are

alined, tighten pipe union (10).

Pipe bushing (24)

Using antiseizing tape or sealing compound, wrap or coat the external

threads of pipe bushing (24), pipe to tube elbow (25), pipe nipple (26), pipe

Pipe to tube elbow (25)

elbow (27), and pipe to tube elbow (29).

Pipe nipple (26)

Pipe elbow (27)

Screw pipe bushing (24) and pipe to tube elbow (25) into the centrifugal

Surge tank (28)

pump. Tighten until the free end of pipe to tube elbow (25) is pointing

Pipe to tube elbow (29)

straight up.

Screw pipe nipple (26) and pipe elbow (27) into the centrifugal pump.

Tighten until the free end of pipe elbow (27) is pointing straight up.

Screw surge tank (28) and pipe to tube elbow (29) to pipe elbow (27).

Tighten surge tank (28) and pipe to tube elbow (29) until they are alined

with the shaft of the centrifugal pump.

TM 3-4230-209-30&P

2-97