REASSEMBLY (CONT) - TM-3-4230-209-30-P0105

Position alternator generator (56) into generator bracket (57). Insert two

Alternator generator (56)

hexagon head cap screws (58) and internal tooth lock washers (59)

Generator bracket (57)

through alternator generator (56) and generator bracket (57). Install two

Hexagon head cap

internal tooth lock washers (60) and hexagon plain nut (61).

screw (58)

Internal tooth lock

washer (59)

Internal tooth lock

washer (60)

Hexagon plain nut (61)

Install grooved pulley (62), washer (63), and nut (64). Remove the nut (65)

Grooved pulley (62)

Washer (63)

and one washer (66). Attach ground wire (53) to the top stud on alternator

Nut (64)

generator (56). Reinstall two washers (66) and secure with nut (65).

Nut (65)

Washer (66)

Position bracket (67) onto alternator generator (56).

Bracket (67)

Hexagon head cap

Secure with hexagon head cap screw (68), and internal tooth lock

washer (69).

screw (68)

Internal tooth lock

washer (69)

2-89

TM 3-4230-209-30&P