REASSEMBLY (CONT) - TM-3-4230-209-30-P0069

Channel clamping nuts (15)

Make sure channel clamping nuts (15) are installed and properly posi-

Brackets (16)

tioned in frame member. Position brackets (16) to aline holes with channel

Flat washers (17)

clamping nuts (15). Secure each bracket with two flat washers (17) and

Hexagon head cap

hexagon head cap screws (18) and tighten.

screws (18)

Fuel tank support frame

Position fuel tank support frame assembly (19) with four channel clamp-

assembly (19)

ing nuts (20) installed inside fuel tank support frame assembly (19). Aline

Channel clamping nuts (20)

channel clamping nuts (20) so they aline with holes in brackets (16).

Flat washers (21)

Secure with four flat washers (21 ) and hexagon head cap screws (22).

Hexagon head cap

screws (22)

Machine bolts (23)

Install two machine

Flat washers (24)

nuts (25).

Hexagon self-locking

nuts (25)

2-53

TM 3-4230-209-30&P