REASSEMBLY (CONT) - TM-3-4230-209-30-P0068

TM 3-4230-209-30&P

2-52

2-16. PUMP UNIT SUBASSEMBLY (CONT).

REMARKS

ACTION

LOCATION/lTEM

REASSEMBLY

(CONT)

Pump Unit Subassembly/

Place angle brace (6) in place and install two hexagon head cap screws (7)

Angle brace (6)

in the bottom holes. Install four machine bolts (8), flat washer (9) and

Hexagon head cap

hexagon self-locking nuts (10). Tighten only slightly. Repeat procedure

screws (7)

for remaining bracket.

Machine bolts (8)

Flat washers (9)

Hexagon self-locking

nuts (10)

Slide loop clamp (11) around the plumbing assembly pipe (12) just below

Loop clamp (11)

connection. Position frame assembly (1) so loop clamp (11) will mate with

Plumbing assembly

tab on frame. Install hexagon head cap screw (13) and secure with

pipe (12)

hexagon self-locking nut (14).

Hexagon head cap

screw (13)

Begin to tighten all screws, bolts, and nuts (from 14 back to 4) until tight.

Hexagon self-locking

nut (14)