PERSONNEL SHOWER ASSEMBLY

TM 3-4230-209-20&P

2-36

2-9. PERSONNEL SHOWER ASSEMBLY (CONT).

ACTION

REMARKS

LOCATION/ITEM

Personnel Shower Assembly/

Disassemble top section (1) by unscrewing quick coupling halves (2) from

Top Sections

pipe with holes (3). Remove gaskets (4).

Disassemble top section (5) by unscrewing quick coupling half (6) and

quick coupling half with female threads (7) from pipe with holes (8).

Remove gasket (9).

Personnel Shower Assembly

Remove dirt, trash, and rust. Clean with hot, soapy water then rinse with

Be sure shower holes are open after cleaning and

painting.

clear water. Paint chipped or worn areas with polyurethane coating, as

necessary.

Personnel Shower Assembly

Replace authorized unserviceable parts.

Personnel Shower Assembly/

Apply antiseizing tape or sealing compound to all male

Reassemble top section (5) by screwing quick coupling half with female

threads before reassembly.

Top Sections

threads (7) and quick coupling half (6) on pipe with holes (8). Place

gasket (9) in quick coupling half (6).

Reassemble top section (1) by screwing quick coupling halves (2) on pipe

with holes (3). Place gaskets (4) in quick coupling halves (2).