|
|
Disassemble horizontal support (1) by unscrewing coupling half with male
Personnel Shower Assembly/
threads (2), pipe caps (3 and 4), and pipes (5 and 6) from pipe tee (7).
Horizontal Support
Remove dirt, trash, and rust. Clean with hot, soapy water then rinse with
Personnel Shower Assembly
clear water. Paint chipped or worn areas with polyurethane coating, as
necessary.
Replace authorized unserviceable parts. To replace pipe (5 or 6) see
Personnel Shower Assembly
Apply antiseizing tape or sealing compound to all male
Reassemble by screwing pipes (5 and 6), pipe caps (3 and 4), and cou-
Personnel Shower Assembly/
threads before reassembly.
Horizontal Support
pling half with male threads (2) into pipe tee (7).
TM 3-4230-209-20&P
2-35
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |