Fog Oil Pump. - TM-3-1040-279-12-P0210

TM 3-1040-279-12&P

4-30 FOG OIL PUMP ASSEMBLY (CONT).

g, Fog Oil Pump.

REMOVAL

NOTE

Removal and installation procedures are the

same for both fog oil pumps.

1. Disconnect fog oil hose (1) from elbow (2) on fog oil pump (3).

2. Disconnect fog oil hose (4) from elbow (5) on fog oil pump (3).

3. Disconnect cable assembly (6) from fog oil pump (3).

NOTE

If removing right fog oil pump, remove cable

assembly from strap bracket, and remove hose

clamp from fog oil pump.

4. Remove four screws (7) and washers (8) and remove strap bracket (9).

5. Remove fog oil pump (3) from fog oil pump assembly (10).

6. Remove elbows (2) and (5) from fog oil pump (3).

INSTALLATION

1. Install elbows (2) and (5) on fog oil pump (3).

2. Position fog oil pump (3) on fog oil pump assembly (10) and secure with strap bracket (9), four

bolts (7), and washers (8).

If right fog oil pump was removed then install

hose clamp on fog oil pump and secure cable

assembly in strap bracket.

3. Install cable assembly (6) on fog oil pump (3).

4. Connect fog oil hose (4) to elbow (5) on fog oil pump (3).

5. Connect fog oil hose (1) to elbow (2) on fog oil pump (3).

6. Perform adjustment procedures (P. 4-145).