Cable Assembly 6J3.

TM 3-1040-279-12&P

4-30 FOG OIL PUMP ASSEMBLY (CONT).

f. Cable Assembly 6J3.

REMOVAL

1. Disconnect cable assembly (1) from both fog oil pumps (2) at connectors.

2. Remove screw (3), washer (4), and nut (5) from loop clamp (6) and remove cable assembly (1)

and loop clamp (6).

3. Remove screw (7), washer (8), and loop clamp (9) and remove cable assembly (1).

4. Remove four screws (10), washers (11), and nuts (12) and remove cable assembly (1) from fog

oil pump assembly (13).

INSTALLATION

1. Position cable assembly (1) on fog oil pump assembly (13) and secure with four screws (10),

washers (11), and nuts (12).

2. Attach cable assembly (1) to loop clamp (6) with screw (3), washer (4), and nut (5).

3. Attach cable assembly (1) to loop clamp (9) and secure with screw (7) and washer (8) to fog oil

pump assembly (13).

4. Attach cable assembly (1) to fog oil pumps (2).