Start Air Hose Assembly. - TM-3-1040-279-12-P0152

TM 3-1040-279-12&P

4-16 EQUIPMENT CONTAINER ASSEMBLY (CONT).

m. Start Air Hose Assembly.

REMOVAL

NOTE

Equipment container removed from smoke

generator for clarity.

1. Remove eight screws (1) and washers (2) securing equipment container panel (3).

2. Remove four screws (4), flat washers (5) and lock washers (6) securing pressure switch bracket

assembly (7), and move bracket aside.

3. Disconnect start air hose (8) from nozzle assembly (9).

4. Disconnect start air hose (8) from solenoid assembly (10).

5. Disconnect air pressure hose (11) from pressure switch bracket assembly (7).

6. Loosen two screws (12) securing sides of cover assembly (13). Remove two screws (14), lock

washers (15), and washers (16) securing top of cover assembly and open cover assembly.

7. Remove start air hose (8) from equipment container (17).

INSTALLATION

1. Position start air hose (8) in equipment container (17).

2. Connect start air hose (8) to nozzle assembly (9).

3. Connect start air hose (8) to solenoid assembly (10).

4. Slowly close cover assembly (13) and position hoses in equipment container while closing cover

so that hoses do not become kinked or pinched. Secure cover assembly with screws (12 and 14),

lock washers (15), and washers (16).

5. Position pressure switch bracket assembly (7), and secure with four screws (4), flat washers (5),

and lock washers (6).

6. Connect air pressure hose (11) to pressure switch bracket assembly (7).

7. Position equipment container panel (3) and secure with eight screws (1) and washers (2).