SPECIAL INFORMATION. - TM-5-4930-233-24P0010

TM 5-4930-233-23P

TM 4930-24P/2

(2) FIG Column. This column lists the number of the figure where the item is identified/located. The figures

are in numerical order in Section II and Section III.

(3) ITEM Column. The item number identifies the item associated with the figure listed in the adjacent FIG

column. This item is also identified by the NSN listed on the same line.

b. PART NUMBER INDEX. Part numbers in this index are listed by part number in ascending alphanumeric

sequence ( i e., vertical arrangement of letter and number combination which places the first letter or digit of each group

in order A through Z, followed by the numbers 0 through 9, and each following letter or digit in like order).

(1) CAGEC Column. The Commercial and Government Entity Code (CAGEC) is a 5-digit numeric code used

to identify the manufacturer, distributor, or Government agency/activity that supplies the item.

(2) PART NUMBER Column. Indicates the primary number used by the manufacturer (individual, firm,

corporation, or Government activity), which controls the design and characteristics of the item by means of its

engineering drawings, specifications, standards, and inspection requirements to identify an item or range of items.

(3) STOCK NUMBER Column. This column lists the NSN for the associated part number and manufacturer

identified in the PART NUMBER and CAGEC columns to the left.

(4) FIG Column. This column lists the number of the figure where the item is identified/located in Section II

and Section III.

(5) ITEM Column. The item number is that number assigned to the item as it appears in the figure

referenced in adjacent figure number column.

c. FIGURE AND ITEM NUMBER INDEX.

(1) FIG Column. This column lists the number of the figure where the item is identified/located in Section II

and Section III.

(2) ITEM Column. The item number is that number assigned to the item as it appears in the figure

referenced in the adjacent figure number column.

(3) STOCK NUMBER Column. This column lists the NSN for the item.

(4) CAGEC Column. The Commercial and Government Entity Code (CAGEC) is a 5-digit numeric code used

to identify the manufacturer, distributor, or Government agency/activity that supplies the item.

(5) PART NUMBER Column. indicates the primary number used by the manufacturer (individual, firm,

corporation, or Government activity), which controls the design and characteristics of the item by means of its

engineering drawings, specifications, standards, and inspection requirements to identify an item or range of

items.

5. SPECIAL INFORMATION.

a. USABLE ON CODE. The usable on code appears in the lower left corner of the Description Column heading

Usable on codes are shown as "UOC: " in the Description Column (justified left) on the last line of the applicable item

description/nomenclature. Uncoded items are applicable to all models.

b. FABRICATION INSTRUCTIONS. Bulk materials required to manufacture items are listed in the Bulk Material

Functional Group of this RPSTL. Part numbers for bulk materials are also referenced in the description column of the

line entry for the item to be manufactured/fabricated. Detailed fabrication instructions for items source coded to be

manufactured or fabricated are found in TM 5-4930-233-24P.

c. INDEX NUMBERS. Items which have the word BULK in the figure column will have an index number shown

in the item number column. This index number is a cross-reference between the National Stock Number/Part Number

index and the bulk material list in Section II.

d. ASSOCIATED PUBLICATIONS. The publications listed below pertain to the Lubrication and Servicing Unit

and its components.

Publication

Short Title

TM 5-4930-233-14

Lubrication and Servicing Unit

TM9-2540-205-24&P

Heater, Vehicular