Special Information. - TM-5-4310-352-24P0005

TM 5-4310-352-24P

Code

Application/ Explanation

D Reparable item. When beyond lower level

C Crew or operator maintenance performed within

repair capability, return to depot. Condemnation

organizational maintenance.

and disposal not authorized below depot level.

O Support item is removed, replaced. used at the

L Reparable item. Repair, condemnation, and

organizational level.

disposal not authorized below depot/specialized

I Support item is removed, replaced, used by the

repair activity level.

direct support element of integrated direct

A Item requires special handling or condemnation

support maintenance.

procedures because of specific reasons (i.e.,

F Support item is removed, replaced, used at the

precious metal content, high dollar value, critical

direct support level.

material or hazardous material).

Refer to

H Support item is removed, replaced, used at the

appropriate manuals/directives for specific

general support level.

instructions.

D Support items that are removed, replaced, used

c. National Stock Number. Indicates the National

at depot, mobile depot, specialized repair

stock number assigned to the item and will be used for

activity only.

requisitioning purposes.

NOTE

d. Part Number. Indicates the primary number

Codes "I" and "F" will be considered the

used by the manufacturer which controls the design and

same by direct support units.

characteristics of the item by means of its engineering

(b) The maintenance code entered in the fourth

drawings, specifications standards, and inspection

position indicates whether the item is to be repaired and

requirements to identify an item or range of items.

identifies the lowest maintenance level with the

NOTE

capability to perform complete repair (i.e., all authorized

When a stock numbered item is

maintenance functions). This position will contain one

requisitioned, the repair part received

of the following maintenance codes:

may have a different part number than

the part being replaced.

Code

Application/Explanation

e. Federal Supply Code for Manufacturer (FSCM ).

O The lowest maintenance level capable of

The FSCM is a 5-digit numeric code listed in SB 708-42

complete repair of the support item is the

which is used to identify the manufacturer, distributor, or

organizational level.

Government agency, etc.

F The lowest maintenance level capable of

f. Description. Indicates the Federal item name

complete repair of the support item is the direct

and, if required, a minimum description to identify the

support level.

item. Items that are included in kits and sets are listed

H The lowest maintenance level capable of

below the name of the kit or set with the quantity of each

complete repair of the support item is the

item in the kit or set indicated in the quantity

general support level.

incorporated in unit column. When the part to be used

D The lowest maintenance lever capable of

differs between serial numbers of the same model, the

complete repair of the support item is the depot

effective serial numbers are shown as the last line of the

level.

description. In the Special Tools List, the initial basis of

L Repair restricted to designated specialized

issue (BOI) appears as the last line in the entry for each

repair activity.

special tool, TMDE, and support equipment. When

Z Nonreparable. No repair is authorized.

density of equipments supported exceeds density

B No repair is authorized. The item may be

spread indicated in the basis of issue, the total

reconditioned by adjusting, lubricating, etc., at

authorization is increased accordingly.

the user level. No parts or special tools are

g. Unit of Measure (U/M ). Indicates the standard

procured for the maintenance of this item.

of the basic quantity of the listed item as used in

(3) Recoverability code.

Recoverability

performing the actual maintenance function.

This

codes are assigned to support items to indicate the

measure is expressed by a two-character alphabetical

disposition action on unserviceable items.

The

abbreviation (e.g., ea, in, pr, etc.). When the unit of

recoverability code is entered in the fifth position of the

measure differs from the unit of issue, the lowest unit of

Uniform SMR Code format as follows:

issue that will satisfy the required units of measure will

Recoverability

be requisitioned.

Codes

Definition

h. Quantity Incorporated in Unit. Indicates the

Z Nonreparable item.

When unserviceable,

quantity of the item used in the breakout shown on the

condemn and dispose at the level indicated in

illustration figure, which is prepared for a functional

position 3.

group, subfunctional group, or an assembly. A "V"

O Reparable item.

When uneconomically

appearing in this column in lieu of a quantity indicates

reparable,

condemn

and

dispose

that no specific quantity is applicable, (e.g., shims,

organizational level.

spacers, etc.).

F Reparable item.

When uneconomically

Special Information.

reparable, condemn and dispose at the direct

a. Repair parts kits and gasket sets appear as the

support level.

last entries in the repair parts listing for the figure in

H Reparable item.

When uneconomically

which its parts are listed as repair parts or are listed at

reparable, condemn and dispose at the general

the end of the repair parts listing for the last figure

support level.

containing parts of the kit.