Oil Drain Tube Cap

TM 5-4310-340-24

(2) Install inlet fitting (1) to compressor head.

L-23699. Torque components as specified in the instructions

Tighten securely with fitting alined with inlet tube.

and paragraph 1-5.

(3) Install inlet tube hose on fitting (1) and secure

with two clamps.

2-10 . Oil Drain Tube Cap

a. Removal (fig. C-3).

2-13. Oil Level Dipstick and Packing

(1) Drain oil from compressor.

a. Removal (fig. C-10).

(2)

Disconnect chain (35) from cap (34).

(1) Unscrew dipstick (34) from manifold (39) and

remove dipstick from manifold.

b. Installation

(2) Remove, performed packing (35) from

(1) Install cap on drain tube union (37).

dipstick.

b. Installation

(2)

Connect chain (35) to cap (34).

(1) Install preformed packing (35) on dipstick

(3)

Fill sump with oil (LO 9-2350-232-12).

(34).

(2) Insert dipstick into manifold (39) and tighten

2-11. Oil Drain Tube Cap Chain

securely.

a. Removal (fig. C-3). Disconnect chain (35) from cap

(34) and bracket (36).

2-14. Oil Fill Plug and Packing

b. Installation. Connect chain (35) (approximately 4-

a. Removal (fig C-10).

inches long) to cap (34) and bracket (36).

(1) Unscrew plug (38) from manifold (39).

(2) Remove preformed packing (35) from plug.

2-12. Air Inlet Fitting

b. Installation.

a. Removal (fig C-6).

(1) Install preformed packing (35) on plug 138).

(1) Loosen clamps securing inlet tube hose and

(2) Install plug (38) in manifold (39) and tighten

slide hose from fitting (1).

securely.

(2) Unscrew fitting from compressor head.

b. Installation

(1) Apply teflon tape per MIL-T-27730 to inIet

fittings threads.

2-4