|
|
MAINTENANCE:
Hydraulic Filter
Note: Care must be taken to replace all parts in proper
sequence.
AXLES:
CHECK AXLE MOUNTING NUTS and torque to 700 ft-lbs
(97 m-kg). Replace damaged nuts or axle mounting studs.
CHANGE HYDRAULIC FILTER. Clean all dirt from
around the filter head and remove capscrews. Lift off filter
head and remove coil spring.
Installing Filter Strainer
Remove filter by-pass valve assembly and filter element
and check for foreign material. Remove the filter strainer,
wash all parts in clean solvent and dry with lint-free cloth.
Install strainer, new filter element and O rings. Install
Rev.760501
400-4.9
K300
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |