|
|
STEERING PUMP:
9. Install new seal rings on assembly.
6. Remove body wear plate and check condition.
Seal Ring Replacement
7. Inspect pump body for wear and scoring. If
gear contact wear exceeds .005 inch (0,127 mm) on
10. Reverse procedure for installation. Torque
inlet side, replace body.
side port cover bolts evenly to 20 to 25 ft-lbs (2,8 to 3,5
8. Install all new seals when overhauling pump.
m-kg).
Lightly oil seals before installation. Install new seal in
the body for the drive gear.
Torque Mounting Bolts
K300
60-5.4
Rev. 760501
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |