|
|
DOZER VALVE
FLOAT SECTION:
1. Remove machine screws (item 52) securing seal
retainer plate (item 53).
2. Remove seal retainer plate (item 53) and seal
plate (item 19). Remove spool seals (item 18 and 46).
2. Remove acorn cap (item 17), loosen jam nut
(item 16) and remove adjusting -screw (item 14).
Spool Seal Removal
3. Remove hex nut (item 28) and screws (item 29) which
allow the removal of float positioner bonnet (item 26).
3. Remove spring (item 13) and check for wear or
damage.
4. Remove ball guide (item 11) and ball (item 10)
and inspect for wear or scoring.
Bonnet Removal
Rev.760501
K300
60-2.4
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |