|
|
OVERHAUL OF AXLE ASSEMBLY
must be thoroughly cleaned to prevent the possibility of
The instructions contained herein cover the
disassembly and reassembly of the axle assembly in a
dirt and foreign matter entering the mechanism.
sequence that would normally be followed after the unit
has been re- moved from the machine and is to be
NOTE: Placing axles on steel horses facilitates
completely over- hauled.
disassembly and reassembly. Greater stability is gained
by resting axle mounting pads on horses so that axles
CAUTION: Cleanliness is of extreme importance
are inverted from normal operating positions.
and an absolute must in the repair and overhaul of this
Photographs showing this overhaul procedure were
taken with axle in inverted position.
unit. Before attempting any repairs, the exterior of the
unit
DISASSEMBLY OF AXLE
1.
Remove drain plugs from planetary housings
3. Remove sun gear thrust cap (Fig. 31. Remove
and from differential housing to drain axle (Fig.
"O" ring from cap.
1).
NOTE: Some early versions of axle assemblies do
not have "O" ring feature in thrust cap.
2.
Remove bolts and flat washers securing sun
4.
Remove bolts and lockwashers retaining planer
gear thrust cap (Fig. 2).
came (Fig. 41.
15
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |