|
|
Figure 137
Figure 140
Install right pump drive gear.
Secure converter housing to transmission case with
bolts and washers. Tighten to specified torque.
Figure 138
Figure 141
Align holes in pump drive gear bearing supports with
holes in converter housing. Install bolts and washers
Install new piston ring on stator support. Position
and tighten to specified torque.
support on turbine shaft to clear pump drive gear. Align
support holes with converter housing.
Figure 139
Figure 142
Support converter housing with a chain fall. Spread
forward clutch front bearing retainer ring. Position
Install stator support bolts and tighten to specified
converter housing to transmission case assembly. Tap
torque.
housing into place using caution as not to damage any
of the clutch shaft piston rings.
25
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |