|
|
Figure 116
Figure 113
Install low clutch shaft piston rings. Install new
Position a new gasket on rear transmission case.
gasket and "0" ring on low shaft bearing cap.
Align lock ball in idler shaft rear bearing with notch in
rear transmission cover. Tap cover in place and secure
with bolts and lockwashers.
Figure 117
Figure 114
Install bearing cap and secure with lockwashers and
bolts. Tighten to specified torque.
Figure 115
Figure 118
From front of transmission case tap low clutch and
Install idler shaft rear bearing locating ring.
idler shaft to rear. This will allow clearance to install rear
bearing snap ring.
21
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |