|
|
Figure 64
Remove low gear inner bearing.
Figure 67
Remove front bearing retainer ring
Figure 65
Remove clutch piston return spring. A sleeve with a portion
removed is recommended for removing the clutch piston
return spring, washer, and retainer ring. Sleeve shown is a
common pipe, with a 1-1/2 x 1 [39,0x26,0mm] opening.
The pipe is 6x3-1/4x2-3/4 [155,0x85,0x78,0mm].
Compress spring retainer washer. Through opening
remove spring retainer snap ring. Release tension on
spring retainer. Remove spring retainer and spring. Turn
Figure 68
clutch over and tap clutch shaft on a block of wood to
Remove front bearing.
remove clutch piston.
Forward and 2nd Clutch Disassembly
Figure 66
Figure 69
Remove clutch shaft piston rings.
Remove front bearing locating ring.
12
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |