|
|
Figure 17
Figure 20
Using pry slots in converter housing, pry oil baffle and
Remove bolts
securing converter
housing
to
impeller from housing. NOTE: Impeller, oil baffle and
transmission housing.
impeller hub gear are removed as an assembly.
Figure 21
Support converter housing with a chain fall. Using
spreading type snap ring pliers, spread ears on forward
Figure 18
clutch front bearing retaining ring. Holding snap ring open
Remove stator support to housing bolts.
tap converter housing from transmission housing.
Figure 22
Figure 19
Converter housing removed.
Note front bearing
Remove stator support. NOTE:
Support must be
retaining ring relieved of front bearing.
turned to clear pump drive gear.
-4-
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |