|
|
DRIVE SHAFT GROUP
Center Bearing to Front Axle Drive Shaft
Transmission to Rear Axle Drive Shaft
DRIVE SHAFT REMOVAL:
1.
Park machine on level ground, lower blade,
set parking brake and securely block machine.
2.
Remove journal cross mount bolts from axle
companion flange and remove drive shaft assembly.
Drive Shaft Yoke Nut and Yoke End
3.
To remove front drive shaft from center
bearing, the yoke nut and yoke end must be removed
first.
Drive Shaft Assembly
Rev. 760501
50-1.1
K300
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |