|
|
3208 INDUSTRIAL AND MARINE ENGINES
DISASSEMBLY AND ASSEMBLY
EXPANSION TANK AND HEAT EXCHANGER, STARTER
INSTALL EXPANSION TANK AND HEAT
EXCHANGER (MARINE
ENGINE)
12-1354 & 1374
1. Fasten a hoist to the expansion tank and heat
exchanger and put the unit in position on the
engine. Install bolts (4).
NOTE: Inspect and put oil on the engine coolant inlet
seal before installing the expansion tank and heat
exchanger.
2. Install the rear bolts.
3. Connect hose (3).
4. Connect outlet line hose (1) for engine coolant
and shunt line hose (2).
5. Install the front cover guard.
6. Fill the cooling system with coolant to the
correct level.
REMOVE STARTER (INDUSTRIAL
ENGINE)
11-1453
1. Disconnect the battery cables.
2. Disconnect and put identification on the wiring.
3. Remove bolts (1) and starter (2).
INSTALL STARTER (INDUSTRIAL
ENGINE)
12-1453
1. Put the starter in position on the engine.
2. Install the bolts.
3. Connect
the
wiring
and
battery
cables.
39
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |