|
|
3208 INDUSTRIAL AND MARINE ENGINES
DISASSEMBLY AND ASSEMBLY
FUEL INJECTION PUMP HOUSING AND GOVERNOR
SEPARATION OF GOVERNOR FROM FUEL
INJECTION PUMP HOUSING
Tools Needed
A
B
C
2P8315
Bracket Assembly
1
5P302
Bar
1
3P1544
Timing Pin
1
start by:
a) remove fuel injection pump housing and
governor
1. Install the fuel injection pump housing on tool (A).
2. Remove the bolts (1) that hold the governor
housing (2) to the fuel injection pump
housing.
3. Remove the governor housing (2).
4. Remove two springs (4) and the seat (5)
from the governor housing.
5. Remove the seat (7) from the shaft.
6. Remove the spring (6) from the shaft.
7. Remove the cover (3) from the pump
housing.
8. Remove the shaft (8) and the lever (9) from
the pump housing.
27
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |