|
|
3208 INDUSTRIAL AND MARINE ENGINES
DISASSEMBLY AND ASSEMBLY
FUEL INJECTION PUMP HOUSING AND GOVERNOR
REMOVE FUEL INJECTION PUMP HOUSING
AND GOVERNOR (MARINE ENGINE) 11-1286
Tools Needed
A
B
3P1544
Timing Pin
1
5P2371
Plate
1
0S1616
Bolt 1/4"-20 NC x 1" long
2
start by:
a) remove air cleaner
b) remove fuel injection lines
c) remove air inlet manifold
1. Remove plug from' cover and install tool (A).
2. Remove four bolts (I) and pulley guard (2).
Turn the crankshaft (clockwise) until the timing
pin drops into the groove (slot) in the fuel
injection pump camshaft.
3. Remove two nuts (3) and tachometer drive
cover (4).
4. Remove
the
drive
shaft
(5).
11
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |