|
|
SPECIFICATIONS:
AXLES
Make/Type ............................................................... Clark/Hypoid, outside planetaries
Planetary Capacity (per planet) ................................ 1.6 Imp. gal (1.9 US gal) (7,3 lit)
Differential Capacity................................................. 3.2 Imp. gal (3.8 US gal) (14,5 lit)
Total Lubricant per Axle ........................................... 6.4 Imp. gal (7.6 US gal) (28,2 lit)
DRIVELINES
Make/Type ............................................................... Spicer Universal Joint
Size ......................................................................... 1650 Series
STEERING
Make ........................................................................ Char-Lynn
Type......................................................................... Articulated, full hydraulic Orbitrol system
Pump Capacity @ 2800 RPM................................... 11.8 Imp. gpm (14.2 US gpm) (53.7 lit / min)
THROTTLE
Control ..................................................................... Mechanical linkage over cable
BRAKE
Type......................................................................... Hydro-mechanical
Cylinder Capacity ..................................................... 0.13 Imp. gal (0.16 US gal) (0,6 lit)
FRAME
Separate front and rear frames connected by a center joint assembly providing 80articulated steering and 30
oscillation.
WHEELS
Front
Rear
Width ....................................................................... 38" (965 mm)
30" (762 mm)
Drum Diameter ........................................................ 48" (1219 mm)
48" (1219 mm)
Outside Diameter ..................................................... 64" (1626 mm)
64" (1626 mm)
Number of Teeth ...................................................... 100
80
Total Ballast ............................................................. 360 Imp. gal (432 US gal) (1636 lit)
SPREADER BLADE
Control ..................................................................... Raise, hold, lower and float positions on lever
Width ....................................................................... 107.5" (2731 mm)
Height ...................................................................... 32.5" (826 mm)
Depth Below Ground Level....................................... 3.25" (83 mm)
Height Above Ground Level ..................................... 36" (914 mm)
Edge ........................................................................ One piece, replaceable, self-sharpening
K300
Rev. 760501
10-3.2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |