SPECIAL INFORMATION. - TM-32-5865-069-24-P0244

TM 32-5865-069-24&P

NOTE

When a stock numbered item is requisitioned, the item received may

have a different part number than the part being replaced.

e. Federal Supply Code for Manufacturer (FSCM). The FSCM is a 5-digit numeric

code listed in

which is used to identify the manufacturer, distributor,

or Government agency, etc.

f. Description.

Indicates the Federal item name and, if required, a minimum

description to identify the item. The physical security classification of the

item is indicated by the parenthetical entry. Items that are included in kits and

sets are listed below the name of the kit or set with the quantity of each item in

the kit or set indicated in the quantity incorporated in unit column. When the

part to be used differs between serial numbers of the same model, the effective

serial numbers are shown as the last line of the description. When density of

equipments supported exceeds density spread indicated in the basis of issue, the

total authorization is increased accordingly.

Unit of Measure (U/M). Indicates the standard of the basic quantity of the

listed item as used in performing the actual maintenance function. This measure

is expressed by a two-character alphabetical abbreviation (e.g., ea, in, pr, etc).

When the unit of measure differs from the unit of issue, the lowest unit of issue

that will satisfy the required units of measure will be requisitioned.

h. Quantity Incorporated in Unit. Indicates the quantity of the item used in

the breakout shown on the illustration figure, which is prepared for a functional

group, subfunctional group, or an assembly. A "V" appearing in this column in

lieu of a quantity indicates that no specific quantity is applicable, (e.g.,

shims, spacers, etc).

C-4.

SPECIAL INFORMATION.

A square symbol on the components of a CCA denotes the positive end.

b. Action change codes indicates in the left-hand margin of the listing page

denote the following:

N-Indicates an added item.

C-Indicates a change in data.

R-Indicates a change in NSN only.

HOW TO LOCATE REPAIR PARTS.

C-5.

When National Stock Number or Part Number is Unknown:

(1) First. Using the table of contents, determine the functional group or

subgroup within the item belongs. This is necessary since illustrations are

prepared for functional groups or subgroups, and listings are divided into the

same groups.

Change 1

C-4