|
|
TM 3-4240-201-13
APPENDIX B
BASIC ISSUE ITEMS LIST AND ITEMS TROOP INSTALLED OR
AUTHORIZED LIST
Section I.
INTRODUCTION
the equipment. It is applied to an
B-1.
Scope
item peculiar to the equipment which
This appendix lists basic issue items and items troop
because of probable discontinuance
installed or authorized required by the crew/operator for
or shutdown of production facilities
operation of the M7A1 filter unit.
would prove uneconomical to
reproduce at a later time.
B-2.
General
KD ................
An item of depot overhaul/repair kit
This Basic Issue Items and Items Troop installed or
and not purchased separately.
Authorized List is divided into the following sections: a.
Depot kit defined as a kit that
Basic Issue Items List-Section II. Not applicable.
provides items required at the time
b. Items Troop Installed or Authorized List Section
of overhaul or repair.
III. A list, in alphabetical sequence, of items which, at the
KF ................
An item of a maintenance kit and not
discretion of the unit commander, may accompany the
purchased separately. Maintenance
end item, but are not subject to be turned in with the end
kit defined as a kit that provides an
item.
item that can be replaced at
organizational or intermediate levels
B-3.
Explanation of Columns
of maintenance.
The following provides an explanation of columns found
KB ................
Item included in both a depot
in the tabular listings.
overhaul/
repair
kit
and
a
a. Source, Maintenance, and Recoverability Codes
maintenance kit.
(SMR), (5 Positions).
MO ................
Item to be manufactured or fabricated
(1) Source codes (positions 1 and 2).
at organizational level.
Indicates the source for the listed items. Source codes
MF ................
Item to be manufactured or fabricated
are:
at the direct support maintenance
Explanation
Code
level.
PA ...............
Item procured and stocked for
MH ................
Item to be manufactured or fabricated
anticipated or known usage.
at the general support maintenance
PB ...............
Item procured and stocked for
level.
purposes
because
MD ................
Item to be manufactured or fabricated
essentially dictates that a minimum
at depot maintenance level.
quantity be available in the supply
AO ................
Item to be assembled at organizational
systems.
level.
PC ...............
Item procured and stocked and which
AF ................
Item to be assembled at the direct
otherwise would be coded PA
support maintenance level.
except that it is deteriorative in
AH ................
Item to be assembled at the general
nature.
support maintenance level.
PD ...............
Support item, excluding support
AD ................
Item to be assembled at depot
equipment, procured for initial issue
maintenance levels.
or outfitting and stocked only for
XA ................
Item is not procured or stocked
subsequent or additional initial
because the requirements for the
issues or outfittings. Not subject to
item will result in the replacement of
automatic replenishment.
the next higher assembly.
PE ...............
Support equipment procured and
XB ................
Item is not procured or stocked. If not
Code
stocked INTRODUCTION
available
through
salvage,
Explanation for initial issue or
requisition.
outfitting to specified maintenance
XC ................
Installation
drawing,
diagram,
repair activities.
instruction sheet, field service
PF ...............
Support equipment which will not be
drawing, that is identified by
stocked but which will be centrally
manufacturers' part number.
procured on demand.
PG ...............
Item procured and stocked to provide
for sustained support for the life of
B-1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |