SECTION Ill OPERATION UNDER USUAL CONDITIONS

TM 11-6665-230-12

SECTION Ill OPERATION UNDER USUAL CONDITIONS

2-5. OPERATING INSTRUCTIONS.

a. Preparation for use.

1. - Remove the radiacmeter

from the case.

2. Install and check the batteries

from the case and connect it to the headset connector.

3. Remove the headset

4. Remove the harness

from the case and install it on the radiacmeter panel.

b. Operating Procedures. For gamma detection the beta shield on the probe is closed.

NOTE

It is preferred that the headset be used during all operations.

NOTE

If the radicmeter is used in a dimly Iite area, the

meter can be illuminated by the meter light

2-16