PREPARATION FOR STORAGE AND SHIPMENT

TM 11-6665-209-20

1) Remove the test sample only when shipping to depot for calibration and place

in an adequately shielded and labeled container within a radiologically con-

trolled area.

2) Place all the components of the Radiac Set in their storage compartments in the

case. Place the radiacmeter in the case.

3) Place the Radiac Set in a clear vinyl bag and place the bag inside the inner

carton.

4) Seal the carton with cloth tape or strapping tape.

5) Place the inner carton into the outer carton.

6) Stuff cardboard strips around the inner carton to hold it in place (if required).

7) Seal the carton with cloth tape or strapping tape.

8) Make sure that a radiological warning symbol is placed on the outside of the

carton.

2-8