Figure 3-11. Encoder module A4 voltage and resistance diagram.

TM 11-6625-667-45\NAVSHlPS 0969-249-8010/NAVAIR 16-30APM123-2/10 33A1-3-367-22

NOTES:

UNLESS OTHERWISE INDICATED

1. ALL MEASUREMENTS ARE FROM DESIGNATED TERMINAL TO CHASSIS. VOLTAGES SHOWN

ABOVE LEAD LINES, RESISTANCES BELOW. VOLTAGES SHOWN FOR NON-DIGITAL CIRCUITS ONLY

2. VOLTAGES MEASURED WITH MULTIMETER ME-26/U, NO SIGNAL CONDITlONS

3. REMOVE MODULE FROM EQUIPMENT TO MAKE RESISTANCE MEASUREMENTS. MAKE

MEASUREMENTS WITH MULTIMETE R TS-352/U, Rx 100 RANGE FOR INDICATED RESISTANCES

10K OR BELOW, AND Rx 10K RANGE FOR THOSE ABOVE 10K. FIRST READlNG WITH

NEGATIVE LEAD TO CHASSIS, SECOND WITH LEADS REVERSED

TM6625-667-35-22

4. PREFIX REFERENCE DESIGNATIONS WITH A4

Figure 3-11. Encoder module A4 voltage and resistance diagram.

3-26